No products in the cart.
The Pro Loop NX3 loop amplifier, like all amplifiers in the NX series, is designed primarily for continuous use.
Category: Venue Amplifiers and Accessories
The Pro Loop NX3 loop amplifier, like all amplifiers in the NX series, is designed primarily for continuous use. The integrated switched-mode power supply and the Class-D amplifier design enable high efficiency with low waste heat and forms the basis for high reliability and operational safety.
- Automatic Gain Control (AGC) ensures a consistent level on the induction loop
- Metal Loss Correction (MLC) can be used to correct the frequency response due to metal structures in the vicinity.
| Power supply: | 100 – 240 V AC 50/60 Hz |
| Amplifier output | |
|---|---|
| Loop current max.: | 2.5 A RMS |
| Loop voltage max.: | 12 V |
| Frequency range: | 80 – 6000 Hz (± 1,5 dB) |
| Loop resistance DC: | 0,2 – 1,0 Ω |
| Outputs | |
| Loop output: | 2 pole Euroblock plug |
| Inputs | |
| Input 1: | 5-20 mV / 2 kΩ / 48 V fixed (MIC) 180 mV – 2 V / 10 kΩ (LINE) Switchable between Mic and Line Level, 3-pin Euroblock plug |
| Input 2: | 5-20 mV / 2 kΩ / 48 V switchable (MIC), 3.5 mm stereo jack socket 180 mV – 2 V / 10 kΩ (LINE), 3 pol. Euroblock Stecker |
| Input 3: | (LINE) 3.5 mm stereo jack, mono summed |
| Automatic Gain Control (AGC): voice-optimised | |
| Dynamic: | >40 dB |
| Metal Loss Correction (MLC) | |
| MLC: | 0 – 4 dB/Octave |
| Cooling | |
| Type: | fanless |
| Mechanical specifications | |
| Dimensions (H x W x D): | 32 x 167 x 95 mm |
| Weight: | 370 g |
